Duecanali 804

129.446 RSD

Brand Powersoft

800W/2-channel Flexible Amplifier

*cena bez PDV-a

Dostupno kao narudžbina na zahtev

Kategorija:

Opis

The ability to implement any configuration with ease makes the Duecanali series extremely flexible. Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.

The Duecanali 804 is designed to work with Lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized.

MyPowersoft services are available for this product

Features:

Power supply

  • Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
  • Patented output filter with ripple cancellation network
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
  • Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket

Protections

Fully protected circuit design with:

  • Ac protection: shut down power supply when AC mains voltage is outside the operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continuous variable speed fan, front to back airflow
  • Temperature forecast with LCD traced historical behavior.

General

  • Fixed frequency switch-mode output stage for high-grade sound accuracy
  • Compact size – all models only 1 RU for reduced rack cost and space
  • Lightweight – for easier racking and shipping: 7 kg (15.4 lbs)
  • Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
  • Remotely switchable double input (main and aux) per channel

Loudspeaker system configuration

  • Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
  • Switchable 35Hz / 70Hz high pass filter per channel
  • Mixed configuration with Lo-Z/Hi-Z systems possible
  • Bridged mode low impedance per channel pair

Alarms and GPI/O

  • NC/NO contacts per channel for alarm notifications
  • Remote ON/OFF switch
  • Remote VCA control per channel

Remote Control & Monitoring

Via Software:

  • Attenuation (from 0 dB to 26 dB)
  • Max output voltage
  • Output and gain reduction metering
  • Diagnostics (temperature, fans, …)

Via Hardware:

  • Attenuation (from 0 dB to 26 dB)
  • High Pass Filter (35 Hz, 70 Hz)
  • LoZ/HiZ/70V/100V output selection
  • Gain (from 26 dB to 35 dB)

Specifications :

GENERAL
Output power per Channel
Output Power per Channel 500 W @ 2 Ω 400 W @ 4 Ω 400 W @ 8 Ω
Bridge mode 1000 W @ 4 Ω 800 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω 80 Vpeak
Current 39 Apeak
AC MAIN POWER
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 60 V – 264 V
Power consumption/Current Draw
Idle 115 V: 25.6 W – 0.38 A 230 V: 24.7 W – 0.23 A
1/8 of max output power @ 4 Ω 115 V: 150 W – 1.4 A 230 V: 149 W – 0.92 A
THERMAL
Operating temperature range 0° – 45° C – 32° – 113° F
Thermal dissipation*
Idle 115 V: 87 BTU/h 230 V: 84 BTU/h
1/8 of max output power @ 4 Ω 115 V: 171 BTU/h 230 V: 168 BTU/h

 

Dodatne informacije

Brand

Powersoft